Description
Our 3-Ton 12V Electric Hydraulic Jack Kit takes about one minute to reach a max height. A car jack is a necessary auto repair tool, especially when you are far away from vehicle repair shops or like long-distance travel. This car jack is suitable for sedans and SUVs under 3 ton, whether men or women can easily change the tire with ease in an emergent case. It is designed to save your effort and time, instead of tedious manual disassembly, just flick a switch, a car will be lifted, any adult can easily change the tire without asking for help from others or going to the car repair shop. The kit includes an electric hydraulic car jack, built-in air tire pump with needles and air hose, cigarette lighter power line, safety hammer, spare fuses and gloves.
- Specification:
- Input Voltage: 12V DC
- Rate Current: 13A
- Rated Power: 150W
- Max Loading: 3T (6614 lb)
- Lifting Height Range: 5.9 - 17.7 inches
- Power Cord Length: 11.5 feet
- Max pressure: 150psi
- Air hose length: 23.6 inches
- Attention:
- Never use electric car jack on sloped ground, be sure to use it on flat ground
- Do not exceed the limit of load bearing capacity, the car jack is only applicable to vehicles within 3 ton, vehicles beyond 3 ton is not supported;
- To ensure sufficient electricity, it is better to start the vehicle before using the electric jack;
- When the electric car jack is working, please do not get too close to the car and touch it with your fingers to avoid personal injury;
- Please pay attention to the positive and negative terminals of the battery, do not reverse the position of the battery clips when connected to the car battery (DC 12V).
Shipping
Shipping to the United States is free and will take 3-5 business days to arrive. In order to insure fast and safe delivery, we use FedEx, UPS or USPS shipping services. All orders are shipped within 24 hours after which an email will be sent with the tracking number for your order.
Shipping to Hawaii, Alaska, Virgin Islands and Puerto Rico is free and will be made with USPS only.
Express shipping to the United States and Canada (1-2 business days) is available for an additional $30.
CarAutoCovers.com offers international shipping with USPS for a Flat Rate of $95.00 anywhere in the world. Shipping time may vary. However, it usually takes 7-10 Business Days.
Canadian orders are shipped by Canada Post free of charge. The package will take approximately 3-5 business days to be delivered. Sales taxes and duties are included in the price. No additional taxes, duties or fees will be collected by Canada Post upon delivery of your order.
Warranty
Considering the many companies out there, you might be wondering which one to choose and why? At CarAutoCovers.com, we’re confident that our car covers are the best in the industry. The likelihood of you ever having to replace your car cover is small however if you have any issues, we offer an Lifetime Warranty.
How does the warranty work?
We’ll replace your car cover with a brand new one if ANYTHING happens to it. This includes defects, soiling, fading, disintegration, stains, rips, and normal wear and tear.
How to file a warranty claim?
Call us at 1-800-288-5844 and one of our agents can guide you through your claim. You can also email us at Warranty@CarAutoCovers.com. Include pictures of the condition of your car cover for faster processing time.
CarAutoCovers.com warranty doesn’t include vehicle damage.
Installation
How to Install a Car Cover:
- Most car covers will have a "Front" tag either sewn or stamped to the front of the cover. Use this to determine the front and rear of your cover.
- All car covers tag should be in the inside. Putting the car cover upside down may result in damaging your car paints.
- Once you’ve identified the front of the cover, secure this area of the cover around the front bumper first, then pull the cover over the top of the vehicle and secure under the rear bumper last.
- If your custom cover has mirror pockets, be sure to place the cover over the side mirrors first before the ends of the cover are attached to the bumpers.
- If your vehicle does not have an antenna that can be removed or retract flush with your vehicle, you should have received an antenna patch.
- Apply the adhesive-backed antenna patch to where the antenna would hit the cover if it were installed and aligned properly.
- Punch a hole in the center of the patch with a sharp object so that your antenna now has a custom fit.
Removal:
- Release both ends of the cover from under the bumpers.
- Fold up both sides onto the top of the vehicle into a long pile approximately 2 feet (60 cm) wide.
- Start at the front of the vehicle and fold the cover in three foot (1 meter) folds from the front to the back.
Tips:
- Do NOT cover a wet vehicle
- Do NOT cover a hot tail pipe
- Do NOT cover a vehicle with the windows or sun/moon roof open.
- Do NOT cover a convertible vehicle with the top down
- Do NOT cover a car directly after being driven. Let the car cold down before putting the car cover on.
Please make sure to follow those instructions, we are not responsible to any damage that may occur to your vehicle.
Cleaning
It is very important to take good care of your car cover so that the performance of the cover is not affected. Many contaminants such as dirt, grease, oil, etc. can be very harmful to the cover’s performance and it might even deteriorate the cover to the point that the water resistance become invalid. Therefore, we recommend that you regularly wash your cover so that it can protect your vehicle more effectively for longer period of time.
The car cover can be washed either by hand (recommended) or by washing machine.
To wash the cover by hand, simply install the cover on your vehicle and use a water hose to remove all the contaminants, then use a cloth with any multi-purpose cleaner to wash the cover. Apply the water again, then use can use a dry cloth or towel to dry out the cover or simply let it air dry.
For washing machine cleaning:
- Use the largest washing machine possible (for very large vehicles, it is recommended to use industrial size machines).
- Put in on GENTLE mode.
- Use mild powder detergent to clean the cover with cold water. DO NOT use bleach or fabric softener.
- Rinse the cover twice in order to remove all the detergent.
- Cover must be air dry.
VEHICLE SEARCH
